PPR 6 Inch Equal Tee Fitting

A six-inch tee on a pressurized hot water riser is not a fitting you gamble with. A single cold weld there can shut down a hospital wing. Foshan Xinlisu Plastic Technology Co., Ltd. builds the PPR 6 Inch Equal Tee Fitting to take that risk off the table. Molded from virgin polypropylene random copolymer, this Large Diameter Ppr Equal Tee gives you a uniform 160 mm branch with a full PN16 pressure class—enough to run continuous 16-bar cold water or 9.6-bar at 90°C. The Pn16 Ppr Equal Tee Hot/cold body uses a deep socket design on all three ports, with a 62 mm insertion stop that locks the fusion joint straight and centered. Unlike some tees that warp slightly out of plane during cooling, ours holds a true 90-degree split because the mold cores are cooled independently. That precision makes the 6 Inch Ppr Equal Tee Main Line a direct bolt-on for district heating risers, cooling towers, and pumped return headers. In the larger family of Pipe fittings, this one commands the trunk…